NEC WT615 Setup Manual

Also see for WT610 Series: Specifications Command guide Command guide Control commands User guide

Contents

4. Setting the LAN Setting of Projector18Configure the LAN settings in the "Profile" page of "LAN Mode" selected from On-ScreenMenu. Flow of Setting4-3. Wireless LANIf "Enabled" (with check mark)6-1. Setting of "Network Type".Select SSID in "Site Survey".Input "SSID" (if necessary).Select "Mode" (if necessary).6-2. Setting of "WEP"Select the number of bits of "WEP".Select "Key Select".Set "Key 1 to Key 4".Step 7 Finalize "Advanced".Step 8 Reconnect the network.Step 9 Finalize the setting.Step 1 Display "Profile" page of "LAN Mode".Step 2 Select "Profiles".Step 3 Enable or disable "DHCP".If "Disabled" (without check mark)Step 4 Input "IP Address".Step 5 Input "DNS Configuration".Step 6 Setting of "Advanced".If "Easy Connection" is selectedInput "Subnet Mask".Input "Gateway".