NEC WT615 Setup Manual

Also see for WT610 Series: Specifications Command guide Command guide Control commands User guide

Contents

1. What You Can Do with User Supportware 25What You Can Do with User Supportware 21Desktop Control Utility 1.0 is software that operates the desktop screen of a personal com-puter at a remote location from the projector by using a network.z A commercially available USB mouse is connected to the projector to operate the per-sonal computer.z Suppose, for example, a PowerPoint file to be presented in a conference is saved to apersonal computer in your office. If this personal computer is connected to the projectorin the conference room with LAN when the conference is held, the desktop screen of thepersonal computer in your office (Windows 2000/XP) can be projected and the Power-Point file can be presented by operating the projector. In other words the personal com-puter does not need to be brought into the conference room.1-2. Desktop Control Utility 1.0UNLOCKMIRRORLOCKOfficeConference roomImportant• You can use the Desktop Control Utility 1.0 to operate a personal computer located in aseparate room from the projector over a network. Therefore, care must be exercised toprevent any third party from viewing the screen of your personal computer (importantdocuments), copying files, or turning off the power.NEC assumes no liability for any loss or damages arising from information leak or sys-tem failure while you are using Desktop Control Utility 1.0.• In the Windows operating system, click [Control Panel] → [Performance and Mainte-nance] → [Power Options] → [System Standby] → [Never]. This will disconnect LANconnection when the personal computer goes in the standby mode while the DesktopControl Utility 1.0 is being used.• The screen saver function is off while Desktop Control Utility 1.0 is running.