NEC X461HB-R User Manual

Also see for X461HB - MultiSync - 46" LCD Flat Panel Display: Specifications Installation and assembly Specifications Specifications Specifications

NEC X461HB-R User Manual Manual pdf 20 page image

English-18BRIGHTNESS level setfor the monitor to usewhen ambient lightinglevel is low.BRIGHTNESS level set for themonitor to use when ambientlighting level is high.BRIGHTNESS rangeIN BRIGHT: BRIGHTNESS level set for the monitor to use when ambient lighting level is high.IN DARK: BRIGHTNESS level set for the monitor to use when ambient lighting level is low.Figure 1dark brightroom bright conditionScreen Brightness value by AMBIENT modePicture ModeDVI, VGA, RGB/HVSTANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHTHDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHTAMBIENT ModeThe brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within theroom. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dimaccordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lightingconditions.NOTE: When picture mode is set to AMBIENT1 or AMBIENT2, BRIGHTNESS, AUTO BRIGHTNESS and BRIGHTNESS inSCREEN SAVER function are disabled.Do not cover anbibrint sensor when you use AMBIENT1 or AMBIENT2 in PICTURE MODE.AMBIENT parameter settingPICTURE MODE in OSD, select AMBIENT1 or AMBIENT2 and set IN BRIGHT and IN DARK.IN BRIGHT: This is the brightness level that the monitor will go up to when the ambient light level is highest.IN DARK: This is the level of brightness that the monitor will go down to when the ambient light level is low.When the AMBIENT function is enabled the Brightness level of the screen changes automatically according to the lightingconditions of the room (Figure 1).IN DARK IN BRIGHTInformation OSDThe Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc.Press the DISPLAY button on the remote to bring up the Information OSD.ID number assigned to current monitor* 6ID number assigned monitor to be controlled via RS-232C* 7Input NameAudio input modePicture aspectInput Signal InformationSub picture information*6: “IR CONTROL” should be set “Primary” or “Secondary”.*7: “IR CONTROL” should be set “Primary”.*: The product you purchased may not have this feature.