NEC e232 User Manual

Contents

NEC e232 User Manual Manual pdf 24 page image

Auto redialWith the Auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phonecannot connect a call if the other party is busy or if there are network problems. Pressing Softkey 2 during a redial attempt will abort it. To set redial Onor Off, use the following procedure.☛ With the Calls screen displayed, press 3 to display the Auto redial screen.☛ Press 1 to activate or press 2 to deactivate the Auto redial facility.Line identification, The Line identification facility is network dependent.The Line identification enables you to choose whether or not to send your own phone number when you make acall and also whether or not to display a caller’s phone number when you receive a call. To set Line identification,use the following procedure.☛ With the Calls screen displayed, press 4. The Line ID screen is displayed with a ✔ over an activated lineand a ✘ over a deactivated line.☛ To set the status of each line (see table right), use the ▲ and ▼ keys to select a line (the line will flash whenselected).☛ Press Softkey 1 to set the Line identification On or Off.☛ Press to save the current settings.International dialling codesWhen you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefixa + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.Entering international dialling codes☛ With the standby screen displayed, press and hold 0. The 0 character displayed will change to a + character.☛ Key in the country code, area code, and phone number that you wish to call.Line type SettingOutgoing Send own #Show connected #Incoming Show Incoming #Return own #