NEC is8-2k User Manual
Also see for iS8-2K: Installation and adjustment manual
                                                                     | |
Contents
| 
Appendix366. AppendixError code listPlease inquire your dealer/distributor about action to be taken for each error code.Description is omitted for error codes 20 and on.Error code Error message description1 Cover Open Cover is open.2 Lamp Temp. Temperature (lamp temperature) is abnormal.3 Fan Stop Fan has stopped.4 Power Supply Power supply is abnormal.5 Lamp Off Lamp does not light up.6 LampTime Warn Lamp time is over. (Warning)7 LampTime Over Lamp time is over. (Power off)8 Lamp PS Temp. Temperature (lamp power inside temperature) is abnormal.9 Set Temp. Temperature (set inside temperature) is abnormal.10 DLP PS Engine power is abnormal.11 DLP Comm TI-Engine communication error is detected.12 Lamp Timer R Lamp Timer read error is detected.13 Interlock Fail Inter Lock error is detected.14 No Support Eng. DVI Dual Engine does not support.15 Lamp Timer W Lamp Timer write error is detected.20 System Fail21 Self Test Fail22 ARM Fail23 DSP Fail24 Interface FPGA Fail25 Processor FPGA Fail30 IB Diag Not Performed31 IB FPGA Code Invalid32 IB FPGA INITZ Fail33 IB FPGA No-Load Set34 IB FPGA DONE Fail35 IB FPGA Reg R/W Fail36 IB Framestore Test Fail37 IB ANC FIFO Test Fail38 IB RTC Serial # Fail39 IB UART0 Fail |
Related manuals for NEC iS8-2K
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine