NEC split screen Model Operation Manual

Also see for PlasmaSync 42XR5: Specifications Supplementary guide Supplementary guide Brochure Installation guide

Contents

NEC split screen Model Operation Manual Manual pdf 22 page image

En-20Picture Settings MenuStoring picture settingsThis function allows you to store in memory the currentinput signal and PICTURE menu settings and to recallthese settings when necessary.There are six picture memories, and notes of up to 15characters can be added to each.Example: Storing picture settings at MEMORY1On “PICTURE MEMORY” of “PICTURE” menu, select“MEMORY1”, then press the MENU/ENTER button.The “PICTURE MEMORY” screen appears.SEL.PICTURE MEMORY 1 / 2MEMORY1 SET RESETINPUT : DVD/HD1SIGNAL : 480PNOTE : DVD/STAR WARSMEMORY2INPUT : —SIGNAL : —NOTE : —MEMORY3INPUT : —SIGNAL : —NOTE : —NEXT PAGERETURNEXITMENU/ENTER OK SEL.PICTURE MEMORY 2 / 2PREVIOUS PAGEMEMORY4 SET RESETINPUT : —SIGNAL : —NOTE : —MEMORY5INPUT : —SIGNAL : —NOTE : —MEMORY6INPUT : —SIGNAL : —NOTE : —ADJ. RETURNEXITInformation PICTURE MEMORY SettingsOFF: Picture memory not used.MEMORY1 to 6: Picture memory with the specifiednumber used. Maximum memories are 6, not dependingon inputs. Setting the memory• Use the and button to select the desired memoryplace, MEMORY1 to MEMORY6.• Use the and buttons to select “SET”, then pressthe MENU/ENTER button.• If necessary, input a note. Resetting the memoryUse the and button to select the desired memoryplace, MEMORY1 to MEMORY6, then use the and buttons to select “RESET”, and finally press theMENU/ENTER button.The memory is cleared, and “—” is displayed in the“INPUT”, “SIGNAL” and “NOTE” columns. Inputting notes• Use the and buttons to select “NOTE”, then pressthe MENU/ENTER button.• Input the note.Use the and button to select the character.Use the and buttons to move the cursor.Use the EXIT button to delete the character at thecursor position.• When you have finished inputting the note, press theMENU/ENTER button.Adjusting the pictureThe contrast, brightness, sharpness, color and tint can beadjusted as desired.Example: Adjusting the contrastOn “CONTRAST” of “PICTURE” menu, adjust the contrast.SEL. ADJ. RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.CINEMA MODEPICTURE MODEGAMMALOW TONESET UP LEVELCOLOR TUNE: OFF: OFF: MIDDLE: ON: NORMAL: 2.2: MODE1: 0%: 52: 32: 16: 32: 32GREXITCONTRAST : 10Note: If “CAN NOT ADJUST” appears ...When trying to enter the PICTURE submenu, make surePICTURE MODE is not set to DEFAULT.Information Picture adjustment screenCONTRAST: Changes the picture’s white level.BRIGHTNESS: Changes the picture’s black level.SHARPNESS: Changes the picture’s sharpness.Adjusts picture detail of VIDEO display.COLOR: Changes the color density.TINT: Changes the picture’s tint. Adjust for naturalcolored skin, background, etc. Adjusting the computer imageOnly the contrast and brightness can be adjusted whena computer signal is connected. Restoring the factory default settingsSelect “DEFAULT” under the “PICTURE MODE”settings.Reducing noise in the pictureUse these settings if the picture has noise due to poorreception or when playing video tapes on which the picturequality is poor.Example: Setting “NR-3”On “NR” of “PICTURE” menu, select “NR-3”.SEL. ADJ. RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.CINEMA MODEPICTURE MODEGAMMALOW TONESET UP LEVELCOLOR TUNE: OFF: OFF: MIDDLE: ON: NORMAL: 2.2: MODE1: 0%: 52: 32: 16: 32: 32GREXITNR : NR-3Information NR* “NR” stands for Noise Reduction.* This function reduces noise in the picture. Types of noise reductionThere are three types of noise reduction. Each has adifferent level of noise reduction.The effect becomes stronger as the number increases(in the order NR-1 → NR-2 → NR-3).OFF: Turns the noise reduction function off.