NEC split screen Model Operation Manual

Also see for PlasmaSync 42XR5: Specifications Supplementary guide Supplementary guide Brochure Installation guide

Contents

NEC split screen Model Operation Manual Manual pdf 24 page image

En-22Adjusting the colorsUse this procedure to adjust hue and color density for red,green, blue, yellow, magenta and cyan without changingthe white point.You can accentuate the green color of trees, the blue ofthe sky, etc.Example: Adjusting the color tune for blueSet “ADVANCED OSM” to “ON” in the FUNCTION menu.On “PICTURE” menu, select “COLOR TUNE”, then pressthe MENU/ENTER button.The “COLOR TUNE” screen appears.On “BLUE” of “COLOR TUNE”, adjust the color tune.SEL. ADJ. RETURNCOLOR TUNEREDGREENBLUEYELLOWMAGENTACYANRESET : OFF: 32: 32: 20: 32: 32: 32EXITYCMGRBMYCRBGInformation COLOR TUNE settingsRED: Adjusts hue of RedGREEN: Adjusts hue of GreenBLUE: Adjusts hue of BlueYELLOW: Adjusts hue of YellowMAGENTA: Adjusts hue of MagentaCYAN: Adjusts hue of CyanRESET: Resets settings to the factory default value.Use and buttons to select “ON”, then press theMENU/ENTER button.Adjusting the pedestal level (black level)This feature adjusts the video black level in a video image.Example: Setting “3.75%”Set “ADVANCED OSM” to “ON” in the FUNCTION menu.On “SET UP LEVEL” of “PICTURE” menu, select “3.75%”.SEL. ADJ. RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.CINEMA MODEPICTURE MODEGAMMALOW TONESET UP LEVELCOLOR TUNE: OFF: OFF: MIDDLE: ON: NORMAL: 2.2: MODE1: 3.75%: 52: 32: 16: 32: 32GREXITInformation SET UP LEVEL settings0%: Normal status3.75%: 3.75 % lower than normal7.5%: 7.5 % lower than normalChanging the Gamma CurveThis feature adjusts the brightness of the midtone areaswhile keeping shadows and highlights unchanged.Example: Setting “2.3”Set “ADVANCED OSM” to “ON” in the FUNCTION menu.On “GAMMA” of “PICTURE” menu, select “2.3”.SEL. ADJ. RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.CINEMA MODEPICTURE MODEGAMMALOW TONESET UP LEVELCOLOR TUNE: OFF: OFF: MIDDLE: ON: NORMAL: 2.3: MODE1: 0%: 52: 32: 16: 32: 32GREXITInformation GAMMA settingsThe picture becomes darker as the number increases(in the sequence of 2.1, 2.2, 2.3, 2.4).* These values are approximate.Making the Low Tone adjustmentsYou can select the tone reproduction from 2 modes.This function is effective especially for dark images.* This function is available only for 50 inch type.Example: Setting “MODE2”Set “ADVANCED OSM” to “ON” in the FUNCTION menu.On “LOW TONE” of “PICTURE” menu, select “MODE2”.SEL. ADJ. RETURNPICTUREPICTURE MEMORYCONTRASTBRIGHTNESSSHARPNESSCOLORTINTNRCOLOR TEMP.CINEMA MODEPICTURE MODEGAMMALOW TONESET UP LEVELCOLOR TUNE: OFF: OFF: MIDDLE: ON: NORMAL: 2.2: MODE2: 0%: 52: 32: 16: 32: 32GREXIT