NEC uPD780318 Subseries User Manual
                                               | |
Contents
| 
CHAPTER 3 INSTALLATIONUser’s Manual U16214EJ1V0UM 353.5 Jumper Settings on IE-78K0-NSWhen using the IE-780338-NS-EM1 in combination with the IE-78K0-NS, set the jumper on the IE-78K0-NS asshown below.For details of these jumper positions, refer to the IE-78K0-NS User’s Manual (U13731E).Caution If the jumpers are set incorrectly, the board may be damaged.Table 3-3. Jumper Settings on IE-78K0-NSJP2 JP3 JP4 JP6 JP7 JP8Setting 2 to 3 shorted 1 to 2 shorted 1 to 2 shorted 3 to 4 shorted 1 to 2 shorted NoteNote The settings for the JP8 are as follows.1-2 shorted: Internal selection of subsystem clock3-4 shorted: External selection of subsystem clock3.6 Jumper Settings on IE-78K0-NS-AWhen using the IE-780338-NS-EM1 in combination with the IE-78K0-NS-A, set the jumper on the IE-78K0-NS-Aas shown below.For details of these jumper positions, refer to the IE-78K0-NS-A User’s Manual (U14889E).Caution If the jumpers are set incorrectly, the board may be damaged.Table 3-4. Jumper Settings on IE-78K0-NS-A G-780009 BoardJP2 JP3 JP4 JP6 JP7 JP8Setting 2 to 3 shorted 1 to 2 shorted 1 to 2 shorted 3 to 4 shorted 1 to 2 shorted NoteNote The settings for the JP8 are as follows.1-2 shorted: Internal selection of subsystem clock3-4 shorted: External selection of subsystem clockTable 3-5. Jumper Settings on IE-78K0-NS-A G-78K0H Option BoardJP2Setting 2 to 3 shorted |
Related manuals for NEC IE-780338-NS-EM1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine