NEDXCM20125GIG UME-0041-01243.4.5 LVDS OutputIf the receiver requires LVDS input, it can be connected by attaching resistors tothe camera outputsMultidrop is not supported. Connect only 1 receiver per camera.In addition, be sure to check thatFigure 3-4-5 External Trigger Output Connection Diagram (LVDS)3.4.6 TTL OutputTo use TTL output, connect the camera output as shown in figure 3-4-6.The Lo level output is 0V, the Hi level output is 3.3V.To avoid damaging the device, do not connect the – pin.Figure 3-4-6 External Trigger Output Connection Diagram (TTL)external resistor
