NEFF T16.D56 Instruction Manual

Also see for T16.D56: User manual User manual

Contents

NEFF T16.D56 Instruction Manual Manual pdf 38 page image

en Cleaning38Changing the basic settingsThe hob must be switched off.1. Switch on the hob.2. Within the next 10 seconds, touch and hold the zsymbol for 4 seconds.™ and ‚ flash alternately in the left-hand display; ‹lightsup in the right-hand display.3. Touch the z symbol repeatedly until the requireddisplay appears in the left-hand display.4. Touch the + or - symbol repeatedly until the desiredsetting appears in the display.5. Touch the z symbol for 4 seconds.The setting is activated.Switching offTo exit the basic setting, switch off the hob with themain switch and make new settings.DCleaningCleaning Suitable maintenance and cleaning products can bepurchased from the after-sales service or in our e-Shop.CeramicClean the hob after each use. This will prevent spillsfrom burning onto the ceramic.Only clean the hob when it has cooled down sufficiently.Use only cleaning agents which are suitable for glassceramic. Follow the cleaning instructions on thepackaging.Never use:■ Undiluted washing-up liquid■ Detergent intended for dishwashers■ Scouring agents■ Harsh cleaning agents such as oven spray or stainremover■ Abrasive sponges■ High-pressure cleaners or steam jet cleanersGround-in dirt can be best removed with a glassscraper, available from retailers. Please note themanufacturer's instructions.You can also obtain a suitable glass scraper from ourafter-sales service or from the e-Shop.Using special sponges to clean glass ceramic achievesgreat cleaning results.Hob surroundTo prevent damage to the hob surround, observe thefollowing instructions:■ Use only hot soapy water.■ Wash new sponge cloths thoroughly before use.■ Do not use any sharp or abrasive agents.■ Do not use the glass scraper.™† Automatic timer‹‹ Switched off.*‹‚-ŠŠ Cooking time, after which the hotplates switch off.™‡ Duration of the timer end signal‚ 10 seconds.ƒ 30 seconds„ 1 minute.*™ˆ Activation of the heating elements‹ Switched off.*‚ Switched on.ƒ Last setting before the hotplate was switched off.™Š Time for selecting the hotplate‹ Unlimited: the last selected hotplate can always beadjusted without having to select it again.*‚ Once you select a hotplate, you have 10 seconds to adjustit, after which you will have to select it again in order to beable to adjust it.™‹ Reset the basic settings‹ Switched off.*‚ Switched on.Display Function*Basic setting] Æ] Æ