NEFF U12S53.3GB Instruction Manual

NEFF U12S53.3GB Instruction Manual Manual pdf 10 page image

10Once the cooking time has elapsed, the bottom oven switchesoff automatically.1. Turn the operating mode and temperature selector back tothe Û zero position.2. Press the KJ clock function button to exit the clock function.End of operationAutomatic switch-off at a set time.1. Set the operating mode and temperature for the bottom oven.The bottom oven starts heating.2. Press the KJ clock function button repeatedly until theKJand y symbols light up.3. Set the end of operation using the rotary selector(e.g. ‚ƒ:„‹ o'clock).The setting is applied automatically. The clock is thendisplayed again.The bottom oven switches off automatically at the time set forthe end of operation.1. Turn the operating mode and temperature selector back tothe Û zero position.2. Press the KJ clock function button to exit the clock function.Preset operationThe bottom oven switches on automatically and switches off atthe time preselected for the end of operation. To set thisfunction, combine the cooking time and end of operation clockfunctions.Bear in mind that food which spoils easily should not be left inthe cooking compartment for too long.1. Set the operating mode and temperature for the bottom oven.The bottom oven starts heating.2. Press the KJ clock function button repeatedly until the KJand x symbols light up.3. Set the cooking time with the rotary selector(e.g. ‚:„‹ hours).The setting is applied automatically.4. Press the KJ clock function button repeatedly until the KJand y symbols light up.5. Set the end of operation using the rotary selector(e.g. ‚ƒ:„‹ ).The bottom oven switches off and waits until the correct timeto switch on (in the example at ‚:‹‹ ).The bottom oven switches off automatically at the time set forthe end of operation ‚ƒ:„‹1. Turn the operating mode and temperature selector back tothe Û zero position.2. Press the KJ clock function button to end the preselectionmode.Setting the clockYou can only change the clock when no other clock function isactive.1. Press the KJ clock function button repeatedly untilthe KJand 3 symbols light up.2. Set the clock using the rotary selector.The setting is applied automatically.Checking, correcting or deleting settings1. To check your settings, press the KJ clock function buttonrepeatedly until the corresponding symbol lights up.2. If necessary, you can correct your setting using the rotaryselector.3. If you wish to cancel your setting, turn the rotary selector anti-clockwise to the original value.BakingIn this section, you will find information on■ Baking on one level■ Baking on two or more levels■ The baking table■ The baking table for ready-made products■ Tips and tricks for bakingNote: Do not use shelf height 2 when baking with 3CircoTherm®. The air circulation is impaired and this will havea negative effect on your baking.We recommend that you use dark-coloured metal baking tins.Tinplate and glass dishes increase the baking time requiredand the cake will not brown evenly.If you wish to bake using tinplate tins and % Top/bottom heat,you should use shelf position 1.Always slide the universal pan in carefully as far as it will goand make sure that the sloping edge is facing the appliancedoor.