NEFF U15E52.3GB Instruction Manual

Also see for U15E52.3GB: Instruction manual

NEFF U15E52.3GB Instruction Manual Manual pdf 8 page image

8Operating the applianceIn this section, you can read aboutʋ how to switch your appliance on and offʋ how to select an operating mode and temperatureʋ how you can change the basic settingsʋ when your appliance switches off automaticallySwitching on the appliance1. Turn the operating mode selector until the desired operatingmode is selected.A default temperature appears on the temperature display.2. Turn the temperature selector to change the defaulttemperature.Notesʋ You can only start the operating mode Low-temperaturecooking if neither nor ¤ are shown in the temperaturedisplay.ʋ If no default temperature is displayed, the temperature of yourselected operating mode is a fixed setting. You cannotchange this temperature.Current temperaturePress the info button. The current temperature appears for3 seconds.Note: The current temperature can only be displayed withoperating modes with a default temperature.Heating indicatorThe heating indicator displays the rising temperature in thecooking compartment.ʋ Temperature reached (figure A)ʋ Appliance reheating (figure B)Switching off the applianceTurn the operating mode selector to the Ã position. Theappliance is switched off.The appliance has a cooling fan. After the appliance is switchedoff, the cooling fan may continue to run.You can see in the temperature display whether there is high orlow residual heat in the cooking compartment.Changing the basic settingsYour appliance has various basic settings, which are preset atthe factory. You can, however, change these basic settings asrequired.The basic settings for both ovens can be activated using theoperating controls on the } bottom oven.To change the basic settings,ʋ the appliance must be switched off.ʋ the childproof lock and timer function must be switched off1. Press and hold the info button for 3 seconds to go tothe basic settings menu.In the temperature display,³¯ appears.2. Press the info button briefly and repeatedly until the settingsymbol for the current basic setting of a submenu isdisplayed in the temperature display (e.g.´).3. Using the temperature selector, set the required basic settingwithin a submenu (e.g.´´).4. Press and hold the info button for 3 seconds.Your basic setting is saved.You can change the following basic settings:Operating mode Default temper-ature in °CTemperaturerange in °C CircoTherm® 160 40 - 200 Top/bottom heat 170 50 - 275 CircoTherm intensive 220 50 - 275 Circo-roasting 170 50 - 250 Full-surface grill 220 50 - 275Full-surface grill(intensive)**Fixed settingCentre-area grill 180 50 - 275Centre-area grill(intensive)**Fixed setting Bottom heat 200 50 - 225 Low-temperaturecookingFixed setting§ CircoTherm® Eco 160 40 - 200] Oven cleaning Fixed settingA Interior lighting Fixed setting* Turn the temperature selector beyond 275 °C. ³ appearsin the temperature displayTemperature dis-playMeaning Residual heat high (above 120 °C)¤ Residual heat low (between60 °C and 120 °C)Basic settings menuSubmenu Basic setting SettingsymbolChildproof lock Appliance controlsunlocked³¯Appliance controls locked ³³Appliance controls perma-nent lock³