NOVACAT s10 Operator's Manual
                                                    | |
Contents
| 
- 13 -1401_GB-ABBAUEN_3834GBUNHITCHING AND PARKINGUnhitching implement from tractorBe advised!• Always park theimplement onfirm, flat ground.• Use supportstand - otherwisedanger of tipping• Danger of injuryfrom crushing andshearing sectionsin the area of thesupport standDepending on parking situation, mower can be unhitchedin the transport position (H) or working position (R).(H):(R):The following procedure applies to both situations:1) Lift the tractor hoist2) Bring the excavation cylinder in floating positionBe advised!Only leave tractor to unhitch mower when itis stationary and has been secured againstrolling, and when mower has been loweredonto firm, even ground.3) Swivel safety guard (1) into (Pos. A)4) Lower the hoist until the safety flap (1) is blocked.Pos. APos. B115)Extend or fold down support stands (2) and secure26) Remove the terminal from the tractor cabin, roll up thecable and place it on the hose rack of the mower.7) Close off hydraulic hoses and place on mower’s hosestorage.8) Unplug tractor 7-pin lighting plug9) Uncouple cardan shaft and lay on cardan shaft holder.Be advised!Check safety lever (1)!It must be swivelled into (Pos. A)!Otherwise there is the danger that whenuncoupling, the lower link of the mower’smounting frame swivels up in jerks andjolts.10)Uncouple upper link11) Separate the tractor lower link arm from the machine'slower link pin12)Drive the tractor with caution. |
manualsdatabase
Your AI-powered manual search engine