NOVACAT s10 Operator's Manual
                                                    | |
Contents
| 
- 9 -1401_GB-ANBAU_3834GBHITCHING TO TRACTOREnsure that you secure the locating screwin the hole in the bolt! Otherwise the mowermay loosen from the coupling, fall to theground and cause damage to property.- Connect upper link and secure.Be advised!Check cardan shaft length before initialoperation and adapt if necessary!For details see chapter “Cardan shaft”in Attachment B of these OperatingInstructions.- Connect cardan shaft.- Connect the electric plugs for lighting (7-pin) and thecontrol unit (3-pin) at the tractor.- Connect hydraulic hoses depending on equipment.- Lay control line in tractor cabin.- Raise support stand and secure!Set lower link on tractor- Fix the hydraulic lower link so that the implement cannotswing out to the side and the headstock is positionedin the centre.Hitching implement to tractorSafety hints:see Attachment-A1,7.), 8a. - 8h.)CautionThis implementis designed foroperation with atractor (not forself-drive workmachines).Be advised!Use tractor’shydraulic lift onlywhen no one isstanding in thedanger area!Set mounting frame to horizontalNote:The mwer is to be swivelled into fieldtransport position!Hitching implement to tractorBe advised!Risk of crushing! Before bringing thetractor up to the implement, direct allpersons out of the danger area!Be advised!When hitching and unhitching the diskmower, the tractor must be secured againstrolling before entering the danger areabetween tractor and machine is permitted!- Connect and secure tractor lower link with the implementlower link pins.- Adjust the lower link bolt (1) at the support frame withthe locating screw to category 3 / width 3. The mowermust not touch the rear tractor tyres. The bolts are tobe fitted with the balls (1) on both lower links outside.(Exception: if your tractor has the "Quick Hitch" systemthen the bolts with the balls have to be fitted on theinside.)1OutsideInside |
manualsdatabase
Your AI-powered manual search engine