NXP Semiconductors QN9080-001-M17 DK User Manual

Contents

NXP Semiconductors UM11184QN9080-001-M17 DK User’s GuideUM11184 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved.User Manual Rev. 0 — January 2019 3 of 272. Hardware descriptionThe QN9080-001-M17 DK board provides easy access to peripherals, such as buttonsand LEDs. The board also provides useful interfaces, such as the USB port for UARTcommunication, the CMSIS-DAP debugger, and the standard Arduino and Pmodconnector. The USB dongle is a Bluetooth® device powered by QN9080. It acts as amaster/slave when communicating with QN9080-001-M17 devices.2.1 Hardware overviewThe QN9080-001-M17 DK board is shown in Fig 1. The detailed information is listed inTable 1.Fig 1. Board overviewTable 1. QN9080-001-M17 DK board’s mark information listNumber Name Description1 QN9080-001-M17 USBportThe QN9080-001-M17 USB port provides power supplyto the whole board and the USB interface of theQN9080-001-M17 chip.2 LPC4322 USB portThe LPC4322 USB port provides power supply to thewhole board and the USB interface is connected toLPC4322.3 LPC4322 LPC4322 works as a JTAG/SWD debugger.4 QN9080-001-M17moduleThe QN9080-001-M17 module board.5 Jumper JP1This jumper selects the JTAG/SWD debugging target:• Open: on-board target (default).• Short: off-board target.6 Jumper JP5This jumper selects the LPC4322 working mode:• Short: DFU mode enabled.• Open: normal mode (default).