NXP Semiconductors QN9080-001-M17 DK User Manual

Contents

NXP Semiconductors UM11184QN9080-001-M17 DK User’s GuideUM11184 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved.User Manual Rev. 0 — January 2019 6 of 27Fig 3. Debugger connector2.4 QN9080-001-M17 moduleThe QN9080-001-M17 module integrates the BLE radio, controller, protocol stack, BLEantenna, NTAG, clocks, and profile software on a single chip, which provides a flexibleand easy usage of the BLE SoC solution. It includes a high-performance MCU (32-bitArm® Cortex®-M4F), on-chip memory, and peripherals for users to develop a trulysingle-chip wireless MCU solution.Fig 4. Module board detailsTable 3. QN9080-001-M17 module board’s mark information listNumber Name Description1 Jumper J2 Jumper used to select the power NTAG inside.2 Jumper J1 Jumper used to select the power for QN9080-001-M17.3 Connector J4 Connector used to connect the NTAG antenna.Table 4. QN9080-001-M17 DK module’s default jumper settingsJumper Jumper setting FunctionJ1 Pin 1, 2 shorted The NTAG inside shares the same powersupply with the QN9080 inside.J2 Pin 1, 2 shorted QN9080-001-M17 is powered by anon-board power supply.