NXP Semiconductors S12 MagniV Quick Start Manual

Also see for S12 MagniV: Reference manual

Contents

10Jumper list and description (cont.)Jumper DescriptionJ16 VDDX External Ballast TransistorWith this jumper closed, the VSUP Voltage is connected to PNP external transistorcollector for the VDDX voltage regulation.J17VDDX External Ballast TransistorThis jumper enables the signal control of the PNP external transistor collector forthe VDDX voltage regulation.J18 VDDC External Ballast TransistorWith this jumper closed, the VSUP Voltage is connected to PNP external transistorJ19VDDC External Ballast TransistorThis jumper enables the signal control of the PNP external transistor collector forthe VDDC voltage regulation.J2 Humidity and temperature sensor powerThis jumper powers the humidity and temperature sensor.*J20LEDsPin 1-2Closed Red LED is connected to PP6 portPin 3-4Closed Green LED is connected to PP5 portPin 5-6Closed Yellow LED is connected to PP4 portPin 7-8Closed Orange LED is connected to PP0 portQuick Start• Do not close J2 jumper to power up the sensor. The sensor must be supplied with a voltagerange of 2.1V to 3.6V.