Nagano Keiki GC62 Series User Manual

Contents

Nagano Keiki GC62 Series User Manual Manual pdf 18 page image

18 TY-GC62-010A Rev.2キーで -1999～6000メッセージ表示の範囲で任意の値を設定キーで -1999～6000メッセージ表示の範囲で任意の値を設定キーで 0.00～2.00ｓメッセージ表示の範囲で任意の値を設定キーで 0.00～2.00ｓメッセージ表示の範囲で任意の値を設定キーで -1999～6000メッセージ表示の範囲で任意の値を設定キーで -1999～6000メッセージ表示の範囲で任意の値を設定キーで 0.00～2.00ｓメッセージ表示の範囲で任意の値を設定キーで 0.00～2.00ｓメッセージ表示の範囲で任意の値を設定測定モードコンパレータ設定モード（OUT２.コンパレータonディレイ時間）（OUT２.コンパレータoffディレイ時間）（OUT１.コンパレータ設定値 A ）（OUT１.コンパレータ設定値 b ）（OUT１.コンパレータonディレイ時間）（OUT１.コンパレータoffディレイ時間）（OUT２.コンパレータ設定値 b ）（OUT２.コンパレータ設定値 A ）ループチェックモード■ 7.3 Comparator Setting Mode7.3.1 SettingThe comparator has two points of OUT1 and OUT2 built-in, and two kinds of operations“Hysteresis (maximum and minimum)” and “Window Comparator” can be selected at once.Both can set ON/OFF delay time of up to two seconds independently for OUT1 and OUT2.When the output condition of the comparator described below is satisfied, each outputturns on and “Comparator Operation LED (OUT 1, OUT 2)” turns on.● In Measurement Mode, ”SET LED” turns on when key ispressed (do not hold down three seconds or longer) and themode changes to Comparator Setting Mode.This mode sets the operating pressure of the comparator output. The value entered wouldbe “A” and “b” for the hysteresis and window comparator selected in Function SettingMode (Select Comparator Operation).

Measurement ModeComparator Setting ModeLoop Check ModeON for 3 sec. or less ON for 3 sec. or more(OUT 1. Comparator Set Value A)(OUT 1. Comparator Set Value b)(OUT 1. Comparator ON Delay Time)(OUT 1. Comparator OFF Delay Time)(OUT 2. Comparator Set Value A)(OUT 2. Comparator Set Value b)Message sign1 sec.laterMessage sign1 sec.laterMessage sign1 sec.laterMessage sign1 sec.laterSpecify a value between-0.00 and 2.00 with keysMessage sign1 sec.laterMessage sign1 sec.laterMessage sign(OUT 2. Comparator ON Delay Time)(OUT 2. Comparator OFF Delay Time)Specify a value between-0.00 and 2.00 with keysSpecify a value between-0.00 and 2.00 with keys1 sec.laterSpecify a value between-1999 and 6000 with keysSpecify a value between-1999 and 6000 with keysSpecify a value between-1999 and 6000 with keysSpecify a value between-1999 and 6000 with keysMessage sign1 sec.laterSpecify a value between-0.00 and 2.00 with keys

/ 26

Related manuals for Nagano Keiki GC62 Series

Nagano Keiki EJ15 User Manual

Nagano Keiki GC31 Instruction Manual

Nagano Keiki GS5 Instruction Manual

This manual is suitable for:

GC62 Series

manualsdatabase

Your AI-powered manual search engine