Issue: January 18 2005 Page 1614.1.5 DELETE.Any file or index from the directory can be deleted without influencing other takes. To do so, in thedirectory, select the index to be erased, press the “CENTER” key (13), select “Delete index” andconfirm.14.1.6 DELETE TO END.Erase the selected index and all indexes after until the end of the card.14.1.7 RENUMBER.Permits after deleting indexe(s) to renumber the files from the selected file until the end of the card.14.1.8 RENUMBER ALL.Permits after deleting indexe(s) to renumber all the files from file 1 until the end of the card.14.1.9 DELETE ALL MARKS.Permits to remove all markers from the selected index made during record or play.14.2 LOUDSPEAKER.This switches “ON” or “OFF” the internal loudspeaker.NOTE: The internal loudspeaker can only be used in the playbackmode.14.3 TOOLS.Several sub-menus are available.NOTE: If option #1 is not installed, “PROGRAM SELECT” will notappear.14.3.1 FILE NAMING.The “FILE NAMING” menu permits to add 3 characters or numbers tothe index number. The index number in the file name is the last 3 digitsand is automatically incremented by the machine (nnn: min. 001, max.999). To do so, press the “CENTER” key (13) once and the firstcharacter starts blinking. By using the “UP” (9) or “DOWN” (11) arrowkey, select the corresponding character. Pressing the “RIGHT” (12)arrow key or the “CENTER” (13) key selects the next character position.Once the third character is selected press again the “RIGHT” (12) arrow key or several times the“LEFT” arrow key to quit the menu.As shown on the above example, the full file names that will be recorded with this machine will be:ABC001.WAV, ABC002.WAV, ABC003.WAV etc.In the case that several files are already recorded on the card before entering the “FILE NAMING”, theresult will be as follows.Example: 000001.WAV, 000002.WAV,ABC003.WAV, ABC004.WAV etc.ToolsFile namingDate & TimeCard formattingProgram selectLoudspeakerOffOnOnGeneric file name:(nnn = index number)File namingABCnnn.WAV