Nagra ARES-BB Plus Manual
Also see for ARES-BB Plus: Manual
                                 | |
Contents
| 
Issue: January 18 2005 Page 1814.3.6 CONTRAST.This menu permits to adjust the contrast of the display. Pressing the“UP” (9) or “DOWN” (11) key changes the current contrast. Pressing the“CENTER” key (13) stores the contrast settings as a default value atpower on.To escape from the sub-menu, press the “LEFT” key (10) once.14.3.7 VERSION.Selecting the “VERSION” sub-menu shows the serial number of therecorder as well as the current version of the software installed. Theversion shown in this picture corresponds to the version for the “FAT“mode. Turning on the machine in the “NFS” mode will show the “NFS”version.To escape from the sub-menu, press the “LEFT” key (10) once.14.4 TEMPLATES.The Ares-BB+ can store and recall 4 different templates.To have an overview of the different sub-menu settings that can bestored, refer to the menu tree at the end of this manual. Only menusettings with a red square against it can bestored.To use a template, setup the machine as required, then go to“TEMPLATES”, select “STORE 1” and press the execute key (13). Themessage “DONE” will appear. If now any changes were made in the setup, you can go to “RECALL 1”and press the execute key once again. This returns the machine to the settings stored in template 1.TemplatesRecall 4Store 1Store 2X X XContrastCurrent contrast = 32Default contrast = 33TEST 34ARES-BB+S/N : 1234567Soft (FAT): Vx.xxAudio board: 2Software options:#1 #2 #3 |
Related manuals for Nagra ARES-BB Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine