NanoPhotometer N50 User Manual
                                                                                                                                     | |
NanoPhotometer ® NP80/N60/N50/C40 User Guide Version 3.11048. M AINTENANCEM AINTENANCE FREE TECHNOLOGYThe NanoPhotometer® technology is maintenance free. Regular maintenance and calibration isnot necessary.For facilities that are working according to national as well as international guidelines andstandards including: Good Laboratory Practice (GLP), Good Manufacturing Practice (GMP), orISO9000-9004; the proper performance of the spectrophotometer has to be tested and provenon a regular basis with individually set intervals. Implen provides certified NanoPhotometer®secondary standards as an optional accessory. These NanoPhotometer® Didymium glass filtersand standard solution sets are suitable for the control and documentation of the wavelengthaccuracy and the photometric accuracy of your system. IQ/OQ documentation is also available.Please contact your local Implen office or an authorized Implen partner for further information.Support agreements that help to fulfill the demands of regulatory guidelines concerningGLP/GMP include: calibration certification using filters traceable to international standards(during production and quality control), certified engineers and calibrated test equipment,approved to ISO 9001 standard, automatic self-diagnostic calibration test during start of theNanoPhotometer®, result is documented in each data output file, and possibility to save aImplen Document Source (IDS) file (no data manipulation possible).REPLACEMENT P ARTS Lamp ReplacementThe NanoPhotometer® is equipped with a xenon flash lamp with a lifetime of 109 flashes (up to10 years). This lamp should not need replacement for several years. In the unlikely event thelamp does need to be replaced, this should be done by the manufacturer or a certified serviceengineer from your supplier. Battery ReplacementThe optional battery pack can only be assembled or replaced by the manufacturer or a certifiedservice engineer from your supplier.Note: Danger of explosion if battery is incorrectly replaced. Replacement only with the same orequivalent type recommended by the manufacturer: Replacement needs to be done by acertified service engineer Touchscreen ReplacementThe optional touchscreen can only be assembled or replaced by the manufacturer or a certifiedservice engineer from your supplier. |
manualsdatabase
Your AI-powered manual search engine