NanoPhotometer N50 User Manual
                                                                                                                                     | |
NanoPhotometer ® NP80/N60/N50/C40 User Guide Version 3.125The installer should be logged in with full administration rights. If you have insufficientprivileges, installation may fail. If in doubt consult your PC administrator.3. Open the NPOS software and choose the preferred connection. For USB, connect theNanoPhotometer® with the provided USB cable to the PC, for WiFi Hotspot connection ensurestable WiFi connection between PC and NanoPhotometer® (SSID: Serial number, password:Implenuser) and for LAN connect the NanoPhotometer® to the local network via Ethernetcable or WiFi network.Note: If there is Avira installed on your computer, it is recommended to switch off the browsersafety. This may interfere with the NPOS running on your computer.I NSTALLING N ANO P HOTOMETER ® APP ON T ABLET OR S MARTPHONEThe NanoPhotometer® App can be installed as an application on tablets and smartphones withcompatible Android and iOS operating systems. The NanoPhotometer® App is available for freedownload in the app store (Apple Store and Google Play Store).1. Download and install the NanoPhotometer® App from the app store2. Connect the tablet or smartphone via WiFi Hotspot to the NanoPhotometer®.SSID: Serial number, password: Implenuser3. Open the NanoPhotometer® App4. When connected via WiFi Hotspot the NanoPhotometer® will recognize the tablet/smartphoneas a remote control device and measurements can be initiated from the tablet or smartphone.5. Results will be shown on the tablet or smartphone once measurements have been taken |
manualsdatabase
Your AI-powered manual search engine