36Finish measuring- To stop a measurement, click .- By clicking , and then clicking in ‘Approach Panel’ youcan retract the sample holder to a safe and visible distance from the tip.- Close all panels in order to see the saved ‘snapshots’.- Activate the ‘snapshot’ that you would like to save, by clicking onto theimage. Select the menu ‘File->Save as...’. Select the name and the folderyou would like to store the image in.These stored images and all the corresponding data can be opened with theeasyScan E-Line software , viewed, analysed and printed any time (see alsoSoftware Reference).Turning off and storing the instrument- Exit the easyScan E-Line program after having stored all desired images.If you leave the program without saving some data the program asks ifyou really do not want to save them:If, however, you would like to save some images use . If not you canleave the program with .- Disconnect the power supply from the mains supply.If you perform measurements regularly leave the instrument with the coverover the scanner to protect it against dust.If you do not operate the instrument for several weeks you should put itback into the instrument suitcase:- Remove the sample and sample holder and pack up all parts. The tip canbe left in the scanner.FIRST MEASUREMENTS F INISH MEASURING