Napoleon Ascent X 42 Series Installation Manual

Contents

Napoleon Ascent X 42 Series Installation Manual Manual pdf 31 page image

ENW415-1794 / 06.28.1831venting installation4.3.4 restricting vertical vents• Turn off gas and electrical supply before servicing the appliance.• Appliance may be hot, do not service until appliance is cool.• For safe and proper operation of the appliance, follow the venting instruction exactly.• To avoid danger of suffocation, keep the packaging bag away from babies and children. Do not use incribs, beds, carriages or play pens. This bag is not a toy. Knot before throwing away.! WARNINGVertical installations may display a very active flame. If this appearance is not desirable, the exhaust outlet may berestricted with a Wolf Steel approved restrictor kit. This kit is not recommended for short vertical vent runs.Depending on the model and/or year of your appliance, mounting holes may not exist.A. If mounting holes exist, remove the screws from the firebox top, align the restrictor plate as illustratedand secure.B. If mounting holes do not exist, align the restrictor plate as illustrated and secure using the two#8x½ hex head sheet metal screws supplied.C. Ensure the plate will pivot at the slot up into the exhaust outlet.D. Depending on the amount of restriction desired, the restrictor plate can be left flat for most restrictionor bent up for varying degrees of restriction.1231. Most restriction2. Moderate restriction3. Least restrictionExhaust collarRestrictorMountingscrewsFirebox topFirebox topRestrictorTop view#8x½ hex headsheet metal screw