Napoleon GD80NT Installation And Operating Instructions Manual

Also see for Madison GD80NT: Installation and operating instructions Installation and operaing instructions Installation & operation instructions

Contents

Napoleon GD80NT Installation And Operating Instructions Manual Manual pdf 39 page image

39W415-0695 / C / 03.19.12The life span of the remote batteries depends on various factors: quality of thebatteries, the number of ignitions, the number of charges to the room thermostat setpoint, etc.When the transmitter batteries are low, a Battery Icon will appear on the LCDdisplay before all battery power is lost. When the batteries are replaced this icon willdisappear.Not applicable when plugged into 110V.When the receiver batteries are low, no “beep” will be emitted from the receiverwhen it receives an ON/OFF command. This in an alert for the receiver that there’s low battery. When thebatteries are replaced the “beep” will be emitted from the receiver when the ON/OFF key is pressed.If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding thethree position slider switch on the receiver to the “ON” position. This will bypass the remote control feature andthe appliance main burner will come on if the gas valve is in the “ON” position.35.1376°FONIf the receiver is equipped with batteries they will enable flame height control, ON/OFF or thermostatfunction to control the fireplace during a power failure. Refer to “APPLIANCE OPERATION” section whencommunications between receiver and transmitter have been lost. The will receiver emit a “beep” sound toconfirm programming has been successful once power is restored. During a power failure, if the fireplace wason, the flame height will stay at the setting prior to the failure. If off when the failure occurs and then turned on,the flame height will come on at “HI”. The flame height can then be controlled by the remote.35.147.10 NIGHT LIGHTS TMThe auxiliary function controls the AUX power outlet onthe Control Module which controls the NIGHT LIGHT™.A. Use the Mode Key to guide you to the AUX icon.B. Pressing the Up Arrow Key will activate theNIGHT LIGHT™.C. Pressing the Down Arrow Key will turn theNIGHT LIGHT™ off. A single “beep” will confirmthe reception of the command.35.1276°FONOFF 76°FONSMART SMARTON7.11 LOW BATTERY / MANUAL BYPASS7.12 IN THE EVENT OF A POWER FAILURE