Napoleon GD82NT-T Installation And Operating Instructions Manual

Also see for Park Avenue GD82NT-PA: Installation and operation instructions Installation and operating instructions

Contents

Napoleon GD82NT-T Installation And Operating Instructions Manual Manual pdf 35 page image

35W415-0769 / A / 12.10.10! WARNINGIt is necessary to hard wire this appliance.Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired.This appliance must be electrically connected and grounded in accordance with local codes. In the absenceof local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA 70-1996National electrical code in the United States.RECEIVERReceiver12 PinConnector110V OUTReceiver Hearth MountOFFON REMOTETPTHTPTHFCM-COMFAN AUX OUTRedBlackMOTORGreenWhiteFan Control Module (FCM)OUTModulating 820Night LightsONOFFREMOTEReceiver Wall MountBLOWERDO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. CALL A QUALIFIEDSERVICE TECHNICIAN IMMEDIATELY TO HAVE THE APPLIANCE INSPECTED FOR DAMAGE TO THEELECTRICAL CIRCUIT.RISK OF ELECTRICAL SHOCK OR EXPLOSION. DO NOT WIRE 110V TO THE VALVE OR TO THEAPPLIANCE WALL SWITCH. INCORRECT RIGGING WILL DAMAGE CONTROLS.ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCEWITH LOCAL CODES. IN THE ABSENCE OF LOCAL CODES, USE THE CURRENT CSA22.1CANADIAN ELECTRIC CODE IN CANADA OR THE CURRENT NATIONAL ELECTRIC CODE ANSI/NFPA NO. 70 IN THE UNITED STATES.ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OF IF THE GAS SUPPLY HAS RAN OUT,WITH THE GLASS DOOR OPENED OR REMOVED.7.0 WIRING DIAGRAM / ELECTRICAL INFORMATION7.1 ELECTRICAL CONNECTION7.1.1 HARD WIRING CONNECTION7.1.2 SCHEMATIC