Napoleon GSS36CFN Installation And Operation Manual

Napoleon GSS36CFN Installation And Operation Manual Manual pdf 20 page image

9.0 finishing! WARNING• Failure to position the logs in accordance with these diagrams or failure to use only logs specifically approvedwith this appliance may result in property damage or personal injury.• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, sinceappliance may not function properly and delayed ignition may occur.• The logs are fragile and should be handled with care.PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect thatis different in every installation. Take the time to carefully position the glowing embers for a maximum glowing ef-fect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colourpigments burn in during the heat-activated curing process. Blocked burner ports can cause an incorrect flamepattern.9.1 birch wood log placement (BLKO36)1. Place log #1 on the rear bracket, ensuring thenotch on the right side of the log fits aroundthe pilot shield. Do not cover any burner ports.2. Place the two holes in log #3 on the two studslocated in the center of the burner. Do notcover any burner ports.3. Place the hole in log #2 on the stud located onthe left side of the burner.4. Place log #5 along the front right side of thegrate and then pull it forward, ensuring the lognotches align with the grate posts.1131321325Continued on next pageLog numbers are located on the bottom or back of the logs.note:W415-1796 / A / 05.17.18EN20