Napoleon GVFL18 Installation And Operating Instructions Manual

Also see for GVFL18: Installation and operating instructions

Contents

Napoleon GVFL18 Installation And Operating Instructions Manual Manual pdf 12 page image

12W415-0809 / B / 01.07.114.2 LOG PLACEMENTFailure to position these logs in accordance with these diagrams or failure to use parts specificallyapproved with this appliance may result in property damage or personal injury.Do not place glowing embers, charcoal embers, vermiculite or charcoal lumps on this burner.! WARNINGPhazer TM logs, exclusive to Napoleon Appliances, provide a unique and realistic glowing effect that is differentin every installation. These logs are fuel specific. Do not interchange. Refer to the replacement parts list.Failure to follow these log placement instructions may cause sooting.B. Place the rear log #1 ontothe locating studs on therear log support.C. Position the holes on thebottom of log #2 onto thefibre embosses shown.D. Position the slotted cav-ities on the bottom oflog #3 onto the slottedprojections shown. Thecharred face should befacing in.E. Position the bottom cavityof log #4 onto the bridge(top right corner of fibreburner cover) as shown,with the charred faceinward.F. Position the pins on thebottom of log #5 into theholes on the left end oflog #1 and the left end oflog #2.G. Place the end of log #6on the right end of log#1. The fork in the logshould straddle the knoton top of the log #2.Log colours may vary. During the initial use of the appliance, the co-lours will become more uniform as colour pigments burn in during theheat activated curing process.Positioning the logs improperly will cause flame impingement andcarboning.Blocked burner ports can cause an incorrect flame pattern, carbon de-posits and delayed ignition. Phazer TM logs glow when exposed to directflame. Use only certified Phazer TM logs available from your authorizeddealer/distributor.A. Place the fibre burnercover onto the two locat-ing studs screwed into thepan burner.