Napoleon HD35NT-2 Installation And Operating Instructions Manual

Also see for HD35NT-2: Installation and operation manual

Contents

Napoleon HD35NT-2 Installation And Operating Instructions Manual Manual pdf 29 page image

W415-2197 / A / 09.14.1729ENCOMBUSTIBLE FRAMING:Sides, back, bottom and top of theappliance0" to stand offsCOMBUSTIBLE FINISHING:Sides, Bottom and Top 1 1/4"(32mm) to sides, 0" to bottom, 6 1/2” (165mm) to top of theapplianceEnclosure Top 70" (177.8cm) from the bottom of the applianceRecessed Depth 22 1/4" (56.5cm)Sides and bottom of the vent pipe 1"* (25mm)Top of vent pipe 2"* (51mm)Ceiling 62" (157.5cm) from the bottom of the appliance* HORIZONTAL VENT SECTIONS: A minimum clearance of 1" (25mm) at the bottom and sides and 2" (51mm)at the top of the vent pipe in all horizontal runs to combustibles is required except for clearances in applianceenclosures. Horizontal vent sections within enclosures require a minimum clearance of 9” (229mm) at the top ofthe vent pipe. See “MINIMUM CLEARANCE TO COMBUSTIBLE ENCLOSURES” section. Use firestop spacerW010-1777 (supplied) where vent pipe penetrates combustible walls.* VERTICAL VENT SECTIONS: A minimum clearance of 1" (25mm) all around the vent pipe on all vertical runsto combustibles is required except for clearances in appliance enclosures. Vertical vent sections within enclosuresrequire a minimum clearance of 4" (102mm) to the sides of the vent pipe. See “MINIMUM CLEARANCE TOCOMBUSTIBLE ENCLOSURES” section. Use firestop spacer W500-0292 (not supplied) where vent pipepenetrates combustible ceilings or floors.ABACK WALL OF CHASE / ENCLOSURE(INCLUDING ANY FINSIHING MATERIALS)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmINSIDECHASEOUTSIDECHASEAABCDEFFAMUR ARRIÈRE DE L’ENCEINTE (INCLUANTDES MATÉRIAUX DE FINITION)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmENCEINTEINTÉRIEUREENCEINTEEXTÉRIEUREAABCDEFFABACK WALL OF CHASE / ENCLOSURE(INCLUDING ANY FINSIHING MATERIALS)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmINSIDECHASEOUTSIDECHASEAABCDEFFAMUR ARRIÈRE DE L’ENCEINTE (INCLUANTDES MATÉRIAUX DE FINITION)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmENCEINTEINTÉRIEUREENCEINTEEXTÉRIEUREAABCDEFFABACK WALL OF CHASE / ENCLOSURE(INCLUDING ANY FINSIHING MATERIALS)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmINSIDECHASEOUTSIDECHASEAABCDEFFAMUR ARRIÈRE DE L’ENCEINTE (INCLUANTDES MATÉRIAUX DE FINITION)2" 51mm2" 51mm4" 102mm4" 102mm 6" 152mmENCEINTEINTÉRIEUREENCEINTEEXTÉRIEUREAABCDEFF5.1 minimum clearance to combustiblesMINIMUM ENCLOSURE CLEARANCESRef HD35-2 HD40-2 HD46-2A 35 3/4" (90.8cm) 40 3/4" (103.5cm) 46 3/4" (118.7cm)B 61 1/2" (156.2cm) 66 1/2" (168.9cm) 72 1/2" (184.2cm)C 43 1/2" (110.5cm) 47" (119.4cm) 51 1/4" (130.2cm)D 14 13/16" (37.6cm) 16 9/16" (42.1cm) 18 11/16" (47.5cm)E 32 3/4" (83.2cm) 35 1/4" (89.5cm) 38 1/4" (97.2cm)F 22 1/4" (56.5cm) 22 1/4" (56.5cm) 22 1/4" (56.5cm)