W415-2197 / A / 09.14.1736ENC. HD35-2 / HD40-2: Place the log charcoal strip (W135-0408) on topof the front grate by engaging the two cut out notches onto the twomiddle posts of the front grate.HD46-2: Place the log charcoal strip (W135-0408) on top of thesupport ember strip.B. Place the middle log (W135-0409) on top of the burner pan. Usethe two bottom holes of the log to locate it onto the two pins on theburner pan.A. Place the rear log (W135-0339) on rear bracket, ensure the log isseated properly on the rear bracket and located on the center pin.LOG IDENTIFICATION CHARTLOGS HD35-2 HD40-2 HD46-2Rear Log W135-0339 W135-0339 W135-0339Middle Log W135-0409 W135-0409 W135-0409Left Log W135-0406 W135-0406 W135-0406Right Log W135-0407 W135-0407 W135-0407Charcoal Strip Log W135-0408 W135-0408 W135-0408Base Left Log N/A N/A W135-0392Base Right Log N/A N/A W135-03936.3 log placementThe individual logs can be easily identified by the numbers cast on the underside of each log.PhazerTM logs and glowing embers exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect thatis different in every installation. Take the time to carefully position the glowing embers for a maximum glowingeffect. During the initial use of the appliance, log colours may vary. During the initial use of the appliance thecolours will become more uniform as colour pigments burn in during the heat activated curing process.! WARNINGFAILURE TO POSITION THE LOGS IN ACCORDANCE WITH THESE DIAGRAMS OR FAILURE TO USEONLY LOGS SPECIFICALLY APPROVED WITH THIS APPLIANCE MAY RESULT IN PROPERTYDAMAGE OR PERSONAL INJURY.LOGS MUST BE PLACED IN THEIR EXACT LOCATION IN THE APPLIANCE. DO NOT MODIFY THEPROPER LOG POSITIONS, SINCE APPLIANCE MAY NOT FUNCTION PROPERLY AND DELAYEDIGNITION MAY OCCUR.THE LOGS ARE FRAGILE AND SHOULD BE HANDLED WITH CARE.76.1A