Napoleon HD81NT Installation And Operating Instructions Manual

Also see for HD81NT: Installation and operating instructions Installation and operating instructions Installation and operating instructions Installation and operating instructions

Contents

Napoleon HD81NT Installation And Operating Instructions Manual Manual pdf 34 page image

W415-1406 / 11.19.1434ENIf access to the control area is necessary AFTER INSTALLATION, remove the access panel or electricalbox cover located inside the firebox. The access panel and gasket must be re-installed before operating theappliance.It is necessary to hard wire this appliance.Permanently framing the appliance with an enclosure, requires the appliance junction box to be hard wired.7.0 ELECTRICAL INFORMATION7.1 HARD WIRING CONNECTION7.2 OPTIONAL BLOWER INSTALLATIONWire Harness AssemblyIPI BoardPilotGroundWireEIPilotSpark ElectrodeFlameSensorValveElectronic Modulation120V OUT FAN AUX OUTCOMPOWERACS/IPI SwitchReceiverWire HarnessControl ModuleNight LightsFanWireHarnessPlug! WARNINGDO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. CALL A QUALIFIEDSERVICE TECHNICIAN IMMEDIATELY TO HAVE THE APPLIANCE INSPECTED FOR DAMAGE TO THEELECTRICAL CIRCUIT.RISK OF ELECTRICAL SHOCK OR EXPLOSION. DO NOT WIRE 110V TO THE VALVE OR TO THEAPPLIANCE WALL SWITCH. INCORRECT WIRING WILL DAMAGE CONTROLS.ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCEWITH LOCAL CODES. IN THE ABSENCE OF LOCAL CODES, USE THE CURRENT CSA22.1 CANADIANELECTRIC CODE IN CANADA OR THE CURRENT NATIONAL ELECTRIC CODE ANSI/NFPA NO. 70 INTHE UNITED STATES.ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RAN OUT,WITH THE GLASS DOOR OPENED OR REMOVED.69.27.3 SCHEMATICSee separate instructions accompanying the blower assembly.