Napoleon Infrared Series Installation Manual

Napoleon Infrared Series Installation Manual Manual pdf 16 page image

W415-1802 / A / 11.06.18EN16finishing3.3 log placement3.3.1 log placement for GDI3! WARNING• Failure to position the logs in accordance with these diagrams or failure to use only logs specifically approvedwith this appliance may result in property damage or personal injury.• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, sinceappliance may not function properly and delayed ignition may occur.• The logs are fragile and should be handled with care.If applicable, insert the following statement:“PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realisticglowing effect that is different in every installation. Take the time to carefully position the glowing embers for amaximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will becomemore uniform as colour pigments burn in during the heat-activated curing process.”note:Log numbers are located on the bottom or back of the logs.IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.Burner OverviewInsert only ifapplicable ---->PHAZER™ log and glowing embers, exclusive to Wolf Steel Ltd., provide a unique and realistic glowing effect thatis different in every installation. Take the time to carefully position the glowing embers for a maximum glowing ef-fect. Log colours may vary. During the initial use of the appliance, the colours will become more uniform as colourpigments burn in during the heat-activated curing process.Pilot ShieldBurner PortsStuds(Log #2)Studs(Log #3)Lower Media Tray(Logs #6, #7, and #8)A1 A2 B2B11Pilot Shield Notch1A1 A23note:Log numbers are located on the bottom or back of the logs.