ENW415-1501 / 05.15.15FRPG53INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE.CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.NEVER LEAVE CHILDREN OR OTHER AT RISK INDIVIDUALS ALONE WITH THE APPLIANCE.INSTALLATION ANDOPERATING INSTRUCTIONS1.26CWolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada /103 Miller Drive, Crittenden, Kentucky, USA, 41030Phone (705)721-1212 •Fax (705)722-6031 •www.napoleonfireplaces.com •hearth@napoleonproducts.comSAFETY INFORMATIONIf the information in these instructions are not followedexactly, a fire or explosion may result causing propertydamage, personal injury or death.Please read entire manual before you install and use yourheater.This heater has not been tested with an unvented gas log set.To reduce risk of fire or injury, do not install an unvented gaslog set into the heater.- This heater can be very hot when burning.- Combustible materials such as firewood, wet clothing, etc.placed too close can catch fire.- Children and pets must be kept from touching the heater whenit is hot.- The chimney must be sound and free of cracks. Beforeinstalling this unit, contact the local building or fire authorityand follow their guidelines.- Operate only with the doors tightly closed.- Burn wood behind the log retainer directly on the firebricks.- Do not use an elevated grate or otherwise raise the fire.- This heater is designed to burn natural wood only. Higherefficiencies and lower emissions generally result when burningair dried seasoned hardwoods, as compared to softwoods or togreen or freshly cut hardwoods.- Do not start a fire with chemicals or fluids such as gasoline,engine oil, etc.- Do not burn treated wood, coal, charcoal, coloured paper,cardboard, solvents or garbage.- Do not let the heater become hot enough for any part to glowred.$10.00! WARNINGHOT GLASS WILL CAUSEBURNS.DO NOT TOUCH GLASS UNTILCOOLED.NEVER ALLOW CHILDREN TOTOUCH GLASS.! WARNINGNZ6000-1SOLID FUEL BURNINGZERO CLEARANCEAPPLIANCETHIS APPLIANCE HAS BEEN TESTED AND LISTED BY INTERTEK TESTING SERVICES LTD. AS PER THE STANDARDS: ULC S610, UL 127 FOR FACTORY BUILTFIREPLACES.