Copying from the Bypass Tray432E Press the [ Exit ] key.ReferenceTo go on to specify a papersize, press the [ Pap. Size] ] key.See ⇒ P.40 “When copyingonto custom size copy paper”.See ⇒ P.41 “When copyingonto standard size copy paper”.E Set your originals, then press the{{{{Start}}}} key.Importantr When copying onto OHP trans-parencies, remove copied sheetsone by one.Noter Push on the engraved centerpoint of the bypass tray to close it.When Copying ontoEnvelopesImportantr If you select Thick Paper as the Pa-per Type setting and select Stand-ard or Custom as the Paper Sizesetting, these functions will remainin effect even after Auto Clear orpressing the {Clear Modes} key.You can alter this behavior bychanging “12. Reset Bypass Set”.See ⇒ P.80 “1. General Features 3 /4”ReferenceFor detail about the recommendedenvelopes, see ⇒ P.17 “Copy Pa-per”A Open the bypass tray.
