Contents - limited warranty
- about the manual
- customer support
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Types of Messages
- The Controller-In-Charge and System Controller
- GPIB Signals and Lines
- Interface Management Lines
- Physical and Electrical Characteristics
- Figure 1.1 - GPIB Connector and the Signal Assignment
- Figure 1.2 - Linear Configuration
- Figure 1.3 - Star Configuration
- Configuration Requirements
- Installing the Hardware
- Additional Programs and Files
- Installing the Software
- Step 2 - Run IBSTART
- Step 3 - Run IBCONF (optional)
- More About IBCONF
- Characteristics of the Instruments
- Default Configurations
- Running IBCONF
- Upper and Lower Levels of IBCONF
- Device Map Concepts and Terms
- Device and Board Characteristics
- Table 2.1 - Timeout Settings
- EOS Byte
- Base I/O Address (Boards Only)
- DMA Channel (Boards Only)
- Table 2.2 - Functions that Alter Default Characteristics
- Using Your GPIB-PC
- Functions — Introduction
- IBRD (bd,buf,cnt)
- IBFIND (bdname,bd)
- IBCLR (bd)
- Placing a Device in Local Mode
- IBRDA (bd,buf,cnt) and
- IBTMO (bd,v)
- Group IV
- Purpose of Board Functions
- IBCMD (bd,buf,cnt) and
- Figure 3.1 - Multiboard GPIB System
- IBWRT (bd,buf,cnt) and
- IBSRE (bd,v)
- More About Device and Board Functions
- IBRSV (bd,v)
- IBPPC (bd,v)
- Group VI
- IBEOS (bd,v)
- General Programming Information
- Status Word
- Error Codes
- Count Variable
- Device Function Calls
- Automatic Serial Polling
- BASICA Files
- BASICA/QuickBASIC GPIB-PC I/O Functions
- BASICA/QuickBASIC "ON SRQ" Capability
- Table 4A.1 - BASICA GPIB-PC Functions
- Table 4A.2 - QuickBASIC GPIB-PC Calls
- Table 4A.3 - QuickBASIC GPIB-PC Calls
- New GPIB-PC Functions
- Table 4A.4 - QuickBASIC Version 4.0 GPIB-PC Functions
- GPIB-PC Function Descriptions
- IBBNA
- IBCAC
- IBCLR
- IBCMD
- IBCMDA
- IBDMA
- IBEOS
- IBEOT
- IBFIND
- IBGTS
- IBIST
- IBLOC
- IBONL
- IBPAD
- IBPCT
- IBPPC
- IBRD
- IBRDA
- IBRDF
- IBRDI
- IBRDIA
- IBRPP
- IBRSC
- IBRSP
- IBRSV
- IBSAD
- IBSIC
- IBSRE
- IBSTOP
- IBTMO
- IBTRAP
- IBTRG
- IBWAIT
- IBWRT
- IBWRTA
- IBWRTF
- IBWRTI
- IBWRTIA
- Programming Examples
- BASICA Example Program - Device
- BASICA Example Program - Board
- QuickBASIC Example Program - Device
- QuickBASIC Example Program - Board
- Running IBIC
- using help
- IBIC Functions and Syntax
- Other IBIC Functions and Syntax
- Error Code
- Byte Count
- SET (Select Device or Board)
- n* (Repeat Function n Times)
- PRINT (Display the ASCII String)
- IBIC Sample Programs
- Board Function Calls
- Section Six - Applications Monitor
- Installing the Applications Monitor
- Applications Monitor Options
- Main Commands
- Session Summary Screen
- Hiding and Showing the Monitor
- Appendix A - Multiline Interface Messages
- Multiline Interface Messages
- Interface Message Reference List
- and Their Solutions
- ENOL(2)
- EADR(3)
- ESAC(5)
- ENEB(7)
- EBUS(14)
- Other Error Conditions
- Software Revisions
- New Functions
- Asynchronous I/O
- Appendix D - Using your Printer with the GPIB-PC
- Appendix E - Application Notes
- Step 3. Transfer Data
- Glossary
- Table Of Contents
|
ContentsGPIB-PC User Manual xiv ©National Instruments Corp.Byte Count................................................................................................... 5-12Auxiliary Functions................................................................................. 5-12SET (Select Device or Board)......................................... 5-13HELP (Display Help Information).................................. 5-13! (Repeat Previous Function)........................................... 5-14- (Turn OFF Display)............................................................ 5-14+ (Turn ON Display)............................................................. 5-15n* (Repeat Function n Times)......................................... 5-16$ (Execute Indirect File).................................................... 5-17PRINT (Display the ASCII String)................................ 5-18E or Q (exit or quit)............................................................... 5-18IBIC Sample Programs.......................................................................... 5-19Device Function Calls......................................................... 5-19Board Function Calls............................................................ 5-22Section Six - Applications Monitor.......................................................6-1Installing the Applications Monitor....................................................6-2IBTRAP..........................................................................................6-2Applications Monitor Options................................................................6-5Main Commands..........................................................................................6-6Session Summary Screen........................................................................6-7Configuring the Trap Mask.....................................................................6-7Configuring the Monitor Mode..............................................................6-7Hiding and Showing the Monitor .......................................6-8Appendix A - Multiline Interface Messages.................................A-1Multiline Interface Messages................................................................A-2Interface Message Reference List.......................................................A-4Appendix B - Common Errorsand Their Solutions.............................................................................................B-1EDVR(0)..........................................................................................................B-1ECIC(1)............................................................................................................B-1ENOL(2).......................................................................................................... B-2EADR(3)..........................................................................................................B-3EARG(4)..........................................................................................................B-3ESAC(5).......................................................................................................... B-4EABO(6)..........................................................................................................B-4ENEB(7).......................................................................................................... B-5EOIP(10)..........................................................................................................B-5ECAP(11)........................................................................................................B-5EFSO(12)........................................................................................................ B-5EBUS(14)........................................................................................................B-6ESTB(15)........................................................................................................ B-6
PreviousNext |