IBIC Section SixGPIB-PC User Manual 6-8 ©National Instruments Corp.Session Summary ScreenThis session summary can be viewed by pressing F2. Once displayed,the following keys can be used to manipulate the display:Cursor Up scrolls summary up one lineCursor Down scrolls summary down one linePage Up scrolls summary up one pagePage Down scrolls summary down one pageHome scrolls to the top of summaryEnd scrolls to the end of summaryEscape or F2 exit the session summary display and return to themain monitor screenConfiguring the Trap MaskPressing F5 allows you to change the current configuration of the trapmask. It yields a popup menu with each of the status bits displayedalong with their current state (either ON or OFF). Use the UP andDOWN arrow keys to highlight the desired bit and press F1 to toggle itsstate. Pressing ENTER will record the changes. Pressing ESCAPE willcancel this action and leave the mask unchanged. Selecting all bits hasthe effect of trapping on every call, while turning them all off causes notrapping to occur.Configuring the Monitor ModePressing F6 allows you to change the current configuration of themonitor mode. It yields a popup menu with the current modecheckmarked. Use the up and down arrow keys to highlight the newmode and press ENTER to record the change. Pressing ESCAPE willcancel this action and leave the mode unchanged.
