National Instruments LFH200 Installation Instructions Manual

Contents

National Instruments LFH200 Installation Instructions Manual Manual pdf 24 page image

LFH200 Cable Installation Instructions 24 ni.comSH200LFH-BARE WIRE CableThe SH200LFH-BARE WIRE cable is recommended for connecting the switch module to yoursystem if termination other than 50-pin female D-SUB is required. One end of the cableterminates with an LFH200 connector. The other end of the cable has eight bundles ofunterminated, tinned, and stripped wires.The following tables list the pin assignments for the SH200LFH-BARE WIRE cable.Note The first color listed in the Bare Wire Color column of Tables 9 through 16 isthe primary color of the wire. The second color listed is the stripe color.Note Each of the eight bundles consists of 13 twisted pairs of wires. Only 25 of thewires are used. Therefore, the 26th blue/red wire remains unused and unmentioned inTables 9 through 16.