National Instruments NI 8350 User Manual

Contents

National Instruments NI 8350 User Manual Manual pdf 26 page image

Chapter 2 Installation and Configuration© National Instruments Corporation 2-7 NI 8350 User ManualStandard CMOS FeaturesUse the arrow keys to navigate the options in the Standard CMOSFeatures menu and use or to switch to the valueyou prefer.Date (mm:dd:yy)Use this menu to set the system date. The format is .day The day is determined by the BIOS and isread only.month Select the month using and.date Select the date using and.year Select the year using and.Time (hh:mm:ss)Use this menu to set the system time. The time format is .IDE Primary/Secondary Master/SlavePress or to select Manual, None, or Auto. Yourhard disk specifications must match the drive table. The hard disk will notwork properly if you enter improper information in this menu. If your harddisk drive type is not matched or listed, use Manual to define your owndrive type manually.If you select Manual, you must enter the following related information.This information should be in the hard disk or system documentation.Access Mode The settings are CHS, LBA, Large, andAutoCapacity The formatted size of the storage deviceCylinder The number of cylinders