National Instruments NI PXI-6682 User Manual

Also see for NI PXI-6682: Installation guide User manual

Chapter 2 Installing and ConfiguringNI PXI-6682 Series User Manual 2-2 ni.com3. Remove the filler panel for the PXI or PXIe hybrid slot you chose instep 2.4. Ground yourself using a grounding strap or by touching a groundedobject. Follow the ESD protection precautions described in theUnpacking section of Chapter 1, Introduction.5. Remove any packing material from the front panel screws andbackplane connectors.6. Insert the NI PXI-6682 Series module into the PXI/PXIe hybrid slot.Use the injector/ejector handle to fully insert the module into thechassis.7. Screw the front panel of the module to the front panel mounting rail ofthe chassis.8. Visually verify the installation. Make sure the module is not touchingother modules or components and is fully inserted into the slot.9. Plug in and power on the chassis.The NI PXI-6682 Series module is now installed.Configuring the ModuleThe NI PXI-6682 Series is completely software configurable. The systemsoftware automatically allocates all module resources.The two LEDs on the front panel provide information about module status.The front panel description sections of Chapter 3, Hardware Overview,describe the LEDs in greater detail.