National Instruments PXI-1045 User Manual

Also see for NI PXI-1045: User guide

National Instruments PXI-1045 User Manual Manual pdf 16 page image

© National Instruments Corporation 2-1 NI PXI-1045 User Manual2Installation and ConfigurationThis chapter describes how to install, configure, and use the PXI-1045chassis.Before connecting the chassis to a power source, read this chapter and theRead Me First: Safety and Electromagnetic Compatibility documentincluded with your chassis.Safety InformationCaution Before undertaking any troubleshooting, maintenance, or exploratory procedure,carefully read the following caution notices.This equipment contains voltage hazardous to human life and safety, and iscapable of inflicting personal injury.• Chassis Grounding—The PXI-1045 requires a connection from thepremise wire safety ground to the PXI-1045 chassis ground. The earthsafety ground must be connected during use of this equipment tominimize shock hazards. Refer to the Connecting Safety Groundsection for instructions on connecting safety ground.• Live Circuits—Operating personnel and service personnel must notremove protective covers when operating or servicing the PXI-1045.Adjustments and service to internal components must be undertakenby qualified service technicians. During service of this product, themains connector to the premise wiring must be disconnected.Dangerous voltages may be present under certain conditions; useextreme caution.• Explosive Atmosphere—Do not operate the chassis in conditionswhere flammable gases are present. Under such conditions thisequipment is unsafe and may ignite the gases or gas fumes.• Part Replacement—Only service this equipment with parts that areexact replacements, both electrically and mechanically. ContactNational Instruments for replacement part information. Installation of