National Instruments PXIe-4302 User Manual And Specifications

Also see for PXIe-4302: User manual CALIBRATION PROCEDURE

Contents

National Instruments PXIe-4302 User Manual And Specifications Manual pdf 3 page image

NI PXIe-4302/4303 and TB-4302/4302C | © National Instruments | 3What You Need to Get StartedTo set up and use a NI PXIe-4302/4303 module with a TB-4302/4302C terminal block, you needthe following items: Hardware– NI PXIe-4302/4303 module– TB-4302/4302C terminal block– NI PXI Express chassis– Cabling and sensors as required for your application Tools– Number 1 and 2 Phillips-head screwdrivers– 1/8 in. flathead screwdriver– Long-nose pliers– Wire cutter– Wire insulation stripper Documentation– Read Me First: Safety and Electromagnetic Compatibility– NI PXIe-4302/4303 and TB-4302/4302C User Guide and Terminal BlockSpecifications– NI PXIe-4302/4303 User Manual– NI PXI Express chassis user manualYou can download needed documents from ni.com/manuals.InstallationInstall the SoftwareNote You must be an administrator to install NI software and devices on yourcomputer.Ensure that the following software is installed before installing the NI PXIe-4302/4303 andTB-4302/4302C hardware:1. Your application software, such as LabVIEW, LabWindows™ CVI ™ or .NET.2. NI-DAQmx—NI PXIe-4302/4303 modules were first supported in NI-DAQmx 15.1.Note For detailed NI software version support, refer to the NI-DAQmx Readme.Back up any applications before upgrading software or modifying the application.