National Instruments PXIe-4310 Getting Started Manual

Also see for PXIe-4310: User manual CALIBRATION PROCEDURE

National Instruments PXIe-4310 Getting Started Manual Manual pdf 15 page image

PXIe-4310 and TB-4310 (10V)/TB-4310 (600V) | © National Instruments | 15Module RemovalCaution Do not remove a module with the power on. Doing so can damage themodule.To remove the module, refer to Figure 7 while completing the following steps:Note To maintain forced air cooling in the PXI Express system, refer to theMaintain Forced-Air Cooling Note to Users.1. Make sure that the chassis is powered off before removing the module.2. Loosen the captive screws on the top and bottom of the module.Caution Do not pull the front panel to remove the module. Doing so may causemodule components to come into contact with adjacent modules, causing damage tothe modules.3. Pull the captive screws to unseat the module and slowly slide the module along the guides.4. Install a filler panel in the empty slot.5. Store the module in an antistatic protective bag.Figure 7. Removing PXIe-4310 Modules1 Captive Screws (Use to remove modules.) 2 Front Panel (Do not use to remove modules.)NI PXIe-1062QCOOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.NATIONALINSTRUMENTS1 2