4 | ni.com | PXIe-4310 and TB-4310 (10V)/TB-4310 (600V)– Wire cutter– Wire insulation stripper Documentation– PXIe-4310 and TB-4310 (10V)/TB-4310 (600V) Getting Started Guide and TerminalBlock Specifications– PXIe-4310 User Manual– PXIe-4310 Specifications– PXI Express chassis user manualYou can download needed documents from ni.com/manuals.InstallationInstall the SoftwareNote You must be an administrator to install NI software and devices on yourcomputer.Ensure that the following software is installed before installing the PXIe-4310 andTB-4310 (10V)/TB-4310 (600V) hardware:1. Your application software, such as LabVIEW, LabWindows™ /CVI ™ , or .NET.2. NI-DAQmx—PXIe-4310 modules were first supported in NI-DAQmx 17.1.Note For detailed NI software version support, refer to the NI-DAQmx Readme.Back up any applications before upgrading software or modifying the application.Unpack and Install the ModuleRemove the packaging and inspect the module. Contact NI if the module is damaged. Do notinstall a damaged module.Caution The module is static sensitive. Always properly ground yourself and theequipment when handling or connecting to the module.Complete the following steps to install the PXIe-4310 module while referring to Figures 1 and 2:Note To maintain forced air cooling in the PXI Express system, refer to theMaintain Forced-Air Cooling Note to Users.1. Plug in your chassis before installing the PXIe-4310. The power cord grounds the chassisand protects it from electrical damage while you install the module.2. Make sure the chassis is powered off.