National Instruments PXIe-4322 Installation Manual

Also see for PXIe-4322: CALIBRATION PROCEDURE

Contents

National Instruments PXIe-4322 Installation Manual Manual pdf 13 page image

NI PXIe-4322 and TB-4322 Installation Guide | © National Instruments | 13Module RemovalCaution Do not remove a module with the power on. Doing so can damage themodule.1. Make sure that the chassis is powered off before removing the module.2. Loosen the captive screws on the top and bottom of the module.Caution Do not pull the front panel to remove the module. Doing so may causemodule components to come into contact with adjacent modules, causing damage tothe modules.3. Pull the captive screws to unseat the module and slowly slide the module along the guides,as shown in Figure 8.4. Replace the filler panel in the empty slot.5. Store the module in an antistatic protective bag.Figure 8. Removing NI SC Express Modules1 Captive Screws (Use to remove modules.) 2 Front Panel (Do not use to remove modules.)NI PXIe-1062Q2COOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.COOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.1