National Instruments PXIe-4322 Installation Manual

Also see for PXIe-4322: CALIBRATION PROCEDURE

Contents

National Instruments PXIe-4322 Installation Manual Manual pdf 8 page image

8 | ni.com | NI PXIe-4322 and TB-4322 Installation GuideInstall the Terminal BlockRefer to Figure 5 to install the terminal block on the module while completing the following steps:1. Move the TB-4322 into position in front of the NI PXIe-4322 and engage the alignmentfeature with the guide on the associated module.Figure 5. Installing the TB-4322 on the NI PXIe-4322 Module2. Attach the TB-4322 to the NI PXIe-4322 module by pushing the terminal block straightinto the module. A spring mechanism will lock in the bottom of the terminal block.3. Tighten the mounting screw at the top of the TB-4322 to attach it to the NI PXIe-4322module.Note For safety purposes and to prevent damage to equipment when high voltagesare present, all NI SC Express modules and terminal blocks are keyed to preventconnection between incompatible terminal blocks, modules, and/or cables.4. Power on the chassis.1 NI PXIe Controller2 NI PXIe Chassis3 Mounting Screw4 TB-4322 Terminal Block5 NI PXIe-4322 Module6 Alignment FeatureNI PXIe-1062Q213645COOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.COOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.