Chapter 2 Installation and Configuration© National Instruments 2-17 NI PXIe-8133 User ManualSave & Exit MenuThe Save & Exit menu includes all available options for exiting, saving,and loading the BIOS default configuration. As an alternative to thisscreen, press to load optimal BIOS default settings and to savechanges and exit setup.The Save & Exit menu includes the following settings:• Save Changes and Reset—Any changes made to BIOS settings arestored in NVRAM. The setup program then exits and reboots thecontroller. The key can also be used to select this option.• Discard Changes and Reset—Any changes made to BIOS settingsduring this session of the BIOS setup program are discarded. The setupprogram then exits and reboots the controller. The key can alsobe used to select this option.• Save Changes—Changes made to BIOS settings during this sessionare committed to NVRAM. The setup program remains active,allowing further changes.• Discard Changes—Any changes made to BIOS settings during thissession of the BIOS setup program are discarded. The BIOS setupcontinues to be active.• Restore Factory Defaults—This option restores all BIOS settings tothe factory default. This option is useful if the controller exhibitsunpredictable behavior due to an incorrect or inappropriate BIOSsetting. Notice that any nondefault settings such as boot order,passwords, and so on, are also restored to their factory defaults.The key can also be used to select this option.• Save As User Defaults—This option saves a copy of the current BIOSsettings as the User Defaults. This option is useful for preservingcustom BIOS setup configurations.• Restore User Defaults—This option restores all BIOS settings to theuser defaults. This option is useful for restoring previously preservedcustom BIOS setup configurations.• Boot Override—This option lists all possible bootable devices andallows the user to override the Boot Option Priorities list for thecurrent boot. If no changes have been made to the BIOS setup options,the system will continue booting to the selected device withoutfirst rebooting. If BIOS setup options have been changed and saved,a reboot will be required and the boot override selection will not bevalid.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com