Appendix A Specifications© National Instruments A-5 NI PXIe-8133 User ManualElectromagnetic CompatibilityThis product meets the requirements of the following EMC standards forelectrical equipment for measurement, control, and laboratory use:• EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity• EN 55011 (CISPR 11): Group 1, Class A emissions• AS/NZS CISPR 11: Group 1, Class A emissions• FCC 47 CFR Part 15B: Class A emissions• ICES-001: Class A emissionsNote In the United States (per FCC 47 CFR), Class A equipment is intended for use incommercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australiaand New Zealand (per CISPR 11) Class A equipment is intended for use only inheavy-industrial locations.Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medicalequipment that does not intentionally generates radio frequency energy for the treatmentof material or inspection/analysis purposes.Note For EMC declarations and certifications, and additional information, refer to theOnline Product Certification section.CE ComplianceThis product meets the essential requirements of applicable EuropeanDirectives as follows:• 2006/95/EC; Low-Voltage Directive (safety)• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)Online Product CertificationTo obtain product certifications and the Declaration of Conformity (DoC)for this product, visit ni.com/certification, search by model numberor product line, and click the appropriate link in the Certification column.Environmental ManagementNI is committed to designing and manufacturing products in anenvironmentally responsible manner. NI recognizes that eliminating certainhazardous substances from our products is beneficial to the environmentand to NI customers.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com