National Instruments SwitchBlock Getting Started Manual

Contents

National Instruments SwitchBlock Getting Started Manual Manual pdf 11 page image

What Should I Do if the NI SwitchBlock Fails the Self-Test in MAX?1. Restart the system.2. Launch MAX, and perform the self-test again.3. Power off the chassis.4. Reinstall the failed device in a different slot.5. Power on the chassis.6. Perform the self-test again.Note If the device fails the self-test again, contact NI or visit ni.com/supportfor further troubleshooting information.Where to Go NextDISCOVERCREATELEARNEXPLOREcustom applications withinan application programminginterface (API).about hardware featuresor review devicespecifications.the application developmentenvironment (ADE)for your application.Getting Started withLabVIEWGetting Started withLabWindows/CVINI switch devicespecificationsNI Switches HelpNI Switches HelpNI-SWITCH ExamplesNI-SWITCH Soft Front PanelNI-SWITCH Instrument Drivermore about your products through ni.com.Servicesni.com/servicesSupportni.com/switchesUpdatesni.com/updatesNI Communityni.com/communityLocated online at ni.com/manuals Located using the NI Example FinderWorldwide Support and ServicesThe NI website is your complete resource for technical support. At ni.com/support, you haveaccess to everything from troubleshooting and application development self-help resources toemail and phone assistance from NI Application Engineers.NI SwitchBlock | © National Instruments | 11

/ 12

Related manuals for National Instruments SwitchBlock