National Instruments SwitchBlock Getting Started Manual

Contents

National Instruments SwitchBlock Getting Started Manual Manual pdf 2 page image

This product is intended for use in industrial locations. However, harmful interference mayoccur in some installations, when the product is connected to a peripheral device or test object,or if the product is used in residential or commercial areas. To minimize interference withradio and television reception and prevent unacceptable performance degradation, install anduse this product in strict accordance with the instructions in the product documentation.Furthermore, any changes or modifications to the product not expressly approved by NationalInstruments could void your authority to operate it under your local regulatory rules.Caution To ensure the specified EMC performance, operate this product only withshielded cables and accessories.Caution To ensure the specified EMC performance, the length of all I/O cablesmust be no longer than 30 m (100 ft).Verifying the System RequirementsTo use the NI-SWITCH driver, your system must meet certain requirements. For moreinformation about minimum system requirements, recommended system, and supportedapplication development environments (ADEs), refer to the readme, which is available on thesoftware media or online at ni.com/updates.Unpacking the KitCaution To prevent electrostatic discharge (ESD) from damaging the device,ground yourself using a grounding strap or by holding a grounded object, such asyour computer chassis.1. Touch the antistatic package to a metal part of the computer chassis.2. Remove the device from the package and inspect the device for loose components or anyother sign of damage.Caution Never touch the exposed pins of connectors.Note Do not install a device if it appears damaged in any way.3. Unpack any other items and documentation from the kit.Store the device in the antistatic package when the device is not in use.2 | ni.com | NI SwitchBlock