National Instruments TB-2715 Installation Manual

National Instruments ™ , ni.com ™ , and PXI ™ are trademarks of National Instruments Corporation. Product and company names mentioned herein aretrademarks or trade names of their respective companies.322984A-01 © Copyright 2000 National Instruments Corp. All rights reserved. December 2000INSTALLATION GUIDETB-2715 TERMINAL BLOCKThis installation guide describes how to install and connect signals to theTB-2715 terminal block for use with PXI-653X and PXI-660X modules.Use the TB-2715 terminal block to connect to the signals of a PXI-653X orPXI-660X module. Connect your signals to the screw terminals housed inthe terminal block then install the TB-2715 to the PXI front panel.What You Need to Get StartedTo set up and use the TB-2715, you will need the following:❑ TB-2715 terminal block❑ Quick-reference labels for PXI-653X and PXI-660X❑ One of the following:– PXI-653X module– PXI-660X module❑ 653X User Manual or 660X User Manual❑ 0.10 in. slotted screwdriver❑ Number 1 Phillips screwdriver❑ Wire cutters❑ Wire insulation stripperConnecting Signals to Your Terminal BlockRefer to Figure 1 as you perform the following steps to connect signalsfrom the peripheral device to the TB-2715. For more information aboutconnecting signals to your terminal block, see your 653X User Manual or660X User Manual.